FPGA design consulting
I've been designing FPGAs since 2008: architecture, RTL, IP integration and timing closure on AMD and Intel parts, from small Spartans to RFSoCs. I work with startups and hardware teams who need a senior FPGA engineer for a block, a bring-up or a whole design, and who want it tested, not just built.
What I do
Architecture
Interfaces, clocking, resources and risks pinned down before any RTL is written. Part selection, clock domains and a block diagram your team can argue with.
RTL and IP integration
SystemVerilog and VHDL blocks, AXI interconnect and register maps, and vendor IP wired in and configured: DDR, PCIe, 10GbE, SERDES and data converters.
Timing closure
Constraints written properly, clock domain crossings checked, critical paths pipelined or restructured until the design meets timing with margin.
High-speed links and bring-up
SERDES and JESD204B links tuned and validated with PRBS on real hardware, first power-on, clock trees, and ports between device families.
Every design ships with testbenches. See FPGA verification for how I test, and RFSoC consulting for designs built around RF data converters.
Typical problems I'm brought in for
- Timing won't close, and every build takes hours to tell you so.
- You inherited FPGA code from someone who left, with no tests and no documentation.
- A high-speed link won't train, or it trains and then drops errors under load.
- The design worked on one device family and needs to move to a newer one.
- A board won't come up and nobody can tell whether it's the hardware or the bitstream.
- Your team is strong on software but has no one with deep FPGA experience.
Related work
Quantum computing · 2024
Chip-to-chip control links
A from-scratch FPGA design carrying control traffic over multiple SERDES links, tuned and validated with PRBS.
Software-defined radio · 2012–2016
The smallest SDR modules of their day
Owned the FPGA for a family of tiny radios and ported it from Spartan-6 to UltraScale.
Quantum networking · 2022–2023
Control for a commercial quantum network
RTL, a soft-processor control stack and schematic review across six boards.
How engagements work
Design review
$2,500
fixed price · delivered in three days
Inherited code, timing that won't close, or a plan you want checked. A written assessment with next steps, credited in full toward a sprint.
Sprint
$15,000
fixed price · two weeks
An agreed scope and a working, tested deliverable: a block, a bring-up or a timing fix, with the repo, tests and docs.
Retainer
$25,000 / month
month to month
Ongoing development with priorities set week by week, for teams that need a senior engineer on it continuously.
Prices in US dollars. Tell me about your project and I'll suggest the right fit.
Questions
Which FPGA vendors and families do you work with?
AMD/Xilinx RFSoC, UltraScale+, Zynq and Spartan, and Intel Stratix, Agilex and Cyclone. I write SystemVerilog and VHDL, and C and Python for everything around the FPGA.
Can you take over a design someone else started?
Yes, and it's a common way projects start. A design review is the quickest route: in three days you get a written assessment of where the design stands and what to do next.
Do you work remotely?
Yes. I'm based in West Milford, NJ and work remotely with teams anywhere. Bring-up happens on your board.
Is AI-generated RTL safe to ship?
Only once it's checked. AI agents draft inside my rule sets, then golden models, simulation in CI and hardware-in-the-loop tests catch what generation gets wrong. I review and own everything that ships, and you get the repo, scripted builds, tests and docs.
Need an FPGA engineer?
Tell me what you're building and where you're stuck. I'll reply within one business day.
Start a project